Crawl Space Repair in Powell, TN

We start under the hallway. A bouncy floor usually means a girder has lost contact with a pier, a pier has settled, or the span between supports is long. If it's a support issue, adjustable steel jacks on proper footings firm it up. If the joists themselves are cracked or rotted, we'll tell you that's framing work.

They can if the ground under them stays soaked. We put each jack on a footing, but a footing in mud still moves over time. If your crawl space holds water after rain, plan on handling that first or at the same time, and we'll show you what we see during the estimate.

Once the animal is out, we repair or replace the vent and add a sturdy screen. If you'd like the crawl space sealed, the vent gets closed off for good as part of encapsulation. Either way, check the vapor barrier and insulation near that vent, because animals tend to tear both.

A new insulated door helps with air and animals, but a door below grade will keep taking water until the ground around it is fixed. That usually means regrading or adding a small well with drainage. We can do the door and talk through the water side in the same visit.

Yes, we schedule estimates Monday through Friday between 9 and 5, and Powell is our own backyard. The visit is free with no travel charge. If water is actively coming in, say so when you call and we'll fit you in as early as we can.

Insulation that has fallen and sat on damp ground generally isn't worth saving. We pull out the failed material and bag it. Then we look at whether the space should be sealed, because insulation in a damp vented crawl space tends to fall again.

Yes, support and water come first. The liner goes down over a crawl space that's already supported and draining, so we set any jacks, fix the door and close vents, then lay the reinforced liner on the ground and walls with sealed seams and add a dehumidifier.

A leaning pier is worth dealing with soon because it can slip further and drop the girder. We'll look at why it's leaning, usually soft soil or a poor base. Replacing it with an adjustable steel jack on a proper footing is the usual repair.

Patching works when the tear is small and the rest of the plastic is in good shape. Often the whole sheet is thin and brittle, and patching one spot leaves the next tear waiting. We'll tell you which situation you're in and price both if it's close.

We don't do mold remediation. If we see growth, we'll point it out so you can bring in a remediation company. Once that's done, we can handle the repairs and the drying side.